Rki-instruments 35-3000RK-LEL/O Instrukcja Użytkownika Pobierz pdf (Strona 5)

35-3000RK-LEL/O Sample-Draw Detector • 1

Overview

This operator’s manual describes the 35-3000RK-LEL/O sample-draw detector. This

manual also describes how to install, start up, maintain, and calibrate the sample-draw

detector when using it with a gas monitoring controller. A parts list at the end of this

manual lists replacement parts and accessories for the sample-draw detector.

Specifications

Table 1 lists specifications for the sample-draw detector. See the controller operator’s

manual for information specific to the controller.

WARNING: When using the 35-3000RK-LEL/O, you must follow the instructions and

warnings in this manual to assure proper and safe operation of the

35-3000RK-LEL/O and to minimize the risk of personal injury. Be sure to

maintain and periodically calibrate the 35-3000RK-LEL/O as described in

this manual.

Table 1: Specifications

Target Gas Combustible gas, methane calibration standard

Oxygen

Input Power 24 VDC Nominal (23 VDC - 28 VDC)

Construction (housing) Fiberglass/polyester (NEMA 4X)

Dimensions 8.5 in. H x 6.5 in. W x 4.25 in. D

Weight 4.5 lbs.

Sampling Method Sample-draw

Sample Flow 1.5 SCFH (nominal)

Detection Range Combustible gas: 0 to 100% LEL

Oxygen: 0 to 25% volume

Response Time 90% in 30 seconds

Accuracy Combustible Gas

± 5% of reading or ± 2% LEL (whichever is greater)

Oxygen

± 0.5% O

1 2 3 4 5 6 7 8 9 10 ... 22 23

Brak uwag

Rki-instruments 35-3000RK-LEL/O Instrukcja Użytkownika Strona 5