Rki-instruments SDM-2012 PC Controlled Configuration Instrukcja Użytkownika Pobierz pdf (Strona 201)

Bump Testing GX-2012s and Gas Tracers • 196

• If at any point during the bump test the flow rate to the instrument becomes

too low, the PC Controller Program will abort the bump test and display a

failed bump test screen. The BUMP T LED on the SDM-2012 control

panel will be solid red. Click OK to return to the main program window or

double click an instrument information line to view the bump test or

calibration results in the Logs window. The BUMP T LED on the SDM-

2012 control panel will turn off. Confirm that all tubing connections are

correct and that all lines are clear.

Figure 156: Low Flow Bump Test Failure

24. For all bump test result outcomes, the instruments will be displayed in the main

program window in Details View. To return the main program window to Icons

View, click the Icons radio button.

25. All bump test results can be viewed in the Logs window. See “Bump Test Data”

on page 138 for instructions for viewing bump test data.

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 217 218

Brak uwag

Rki-instruments SDM-2012 PC Controlled Configuration Instrukcja Użytkownika Strona 201