Rki-instruments SC-01 Instrukcja Użytkownika Pobierz pdf (Strona 25)

SC-01 Data Logging Capacity • 25

button if desired. This will not delete any data that has been

saved in the Data Management Program’s database or SC-

01 instrument parameters such as serial number, alarm

settings, or autocalibration settings.

WARNING: If you click the Clear Logger Data button, all

data is erased in the SC-01, but not in the SC-01

Data Management Program’s database. So it is

advisable that you download the data from the

SC-01 first before clearing the data.

SC-01 Data Logging Capacity

Table 1 above lists the SC-01’s data logging capacity for each

interval trend time setting. The interval trend time setting can be

set using the Set window (see “Changing SC-01 Instrument

Parameters” on page 63). When the SC-01’s memory is full, it

overwrites the oldest saved data as new data is saved. To avoid

overwriting data in the SC-01 before it can be downloaded, turn

on the SC-01 and enter its Display Mode to note how much log

time remains in the SC-01 when beginning a data logging

session. If the SC-01’s memory is full, it will indicate “0” as the

amount of log time remaining. See the SC-01 Operator’s Manual

for instructions to use the SC-01’s Display Mode.

Table 1: SC-01 Data Logging Capacity

Interval Trend Time

Data Logging Hours

10 seconds 150 hours

30 seconds 450 hours

60 seconds 900 hours

180 seconds (3 minutes) 2,700 hours

300 seconds (5 minutes) 4,500 hours

600 seconds (10 minutes) 9,000 hours

Logging hours assume that no alarms or other events occur.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 67 68

Brak uwag

Rki-instruments SC-01 Instrukcja Użytkownika Strona 25